What you practice
AXI driver: VALID/READY handshake and item_done (2.2). Implement AXI4-Lite driver handshake and item_done synchronization. It is in AXI Driver — Part 2 · AXI4-Lite UVM Verification of the AXI Masterclass. Verify the AXI4-Lite DUT with UVM and RAL.
AXI only counts when the handshake simulates. RTL Studio is the Verilog and SystemVerilog IDE where you edit the RTL and prove each beat on a VCD.
Run it in the Verilog IDE
- Open the lesson in the IDE and find the valid/ready or AXI channel ports in the editor.
- Simulate with Verilator. Confirm the beat on the VCD, not only in the transcript.
- Check that data moves only on the beats this lesson describes, and that backpressure holds the transfer.
- Synthesize the RTL master, slave, or buffer with Yosys. Leave the UVM bench out of synthesis.
The lesson is done when the simulation matches AXI driver: VALID/READY handshake and item_done. Change the source, run the Verilog simulator again, and read the waveform without leaving the IDE. Simulation guide · Yosys guide.