Pro catalog
Counters
Up/down, modulo, and loadable binary counters with enable logic.
Category overview
Up/down, modulo, and loadable binary counters with enable logic.
IP blocks
-
16-bit cycle counter with prescaler, load enable, match interrupt, and synchronous reset.
-
4-Bit Counter Match Pulse
-
A 4-bit free-running counter with synchronous enable, load, and a wrap strobe output that pulses when the count rolls over from 15 to 0.
-
Synchronous 4-bit down counter with asynchronous reset, parallel load, and enable control.
-
Synchronous 4-digit BCD counter with up/down control, load, and carry/borrow flags.
-
8-Bit Binary Up Counter with load enable and match interrupt request generation.
-
8-Bit Johnson Counter with parallel load, count enable, and match-based interrupt generation.
-
An 8-bit leading zero counter with synchronous load, enable, and match interrupt generation.
-
An 8-bit ring counter with synchronous load and circular right shift functionality.
-
An 8-bit up/down counter with synchronous load and asynchronous reset.
-
Bidirectional Counter 4-Bit with load enable and match interrupt generation.
-
A 1-digit Decade BCD counter with synchronous load, enable, and asynchronous reset.
-
An 8-bit counter with dual compare-match outputs and an interrupt request signal.
-
16-bit event counter with rising-edge detection and synchronous capture register.
-
An 8-bit binary counter with pipelined Gray-code conversion, supporting load, enable, and backpressure.
-
A fully synthesizable 4-bit up counter with synchronous load, enable, and asynchronous reset capabilities.
-
Fully synthesizable 8-bit loadable down counter with match and zero interrupt requests.
-
A parameterized modulo-N counter with asynchronous reset and terminal count output.
-
Parameterized N-Bit Counter with Enable, Wrap, Load, Match IRQ
-
An 8-bit counter with load enable, match-based IRQ, and sticky overflow detection for L1/L2 upgrades.