1.2 · UVM sequence and uvm_do in body() — UVM Class

What you practice

UVM sequence and uvm_do in body() (1.2). Generate FIFO write transactions with a UVM sequence using uvm_do in body(). It is in Sequence — Part 1 · Stimulus Generation of the UVM Masterclass. Create randomized transactions and deliver them safely to the DUT.

The UVM bench compiles in that same browser SystemVerilog simulator. You edit the test in the IDE, run Verilator, and read the log beside the waveform.

Run it in the Verilog IDE

Open the UVM workspace in the IDE. The DUT and the testbench compile together in the browser.
Run the SystemVerilog simulation with Verilator and read the phase and scoreboard lines in the log.
When the check is on pins rather than a print, open the VCD next to that log.
Edit the sequence, driver, or scoreboard in the IDE and rerun. You stay in the same simulator.

The lesson is done when the simulation matches UVM sequence and uvm_do in body(). Change the source, run the Verilog simulator again, and read the waveform without leaving the IDE. Simulation guide · Yosys guide.